It is a professional tool for commercial or DIY use. The kit is ideal assistance for you to remove and install ball joints; bushes and bearings for numerous BMW models from 1 Series to 8 Series.

This silent bearings tool set is designed for long life in daily workshop use and categorized into industrial grade. All tools are sorted in a blow molded case for easy storage and transportation.

• Silent bearing tool set for BMW; 16 pcs as below
• A feed rod:
• Length: 8.9"
• Thread size: M12 x 0.1"
• Hex drive wrench length: 0.3"
• Used for actuating the Silent bearing
• A spindle nut:
• Thread size: M12 x 0.1"
• Hexagonal drive wrench length: 0.7"
• A compression nut(with axial groove bearing):
• Internal thread size: M12 x 0.1"
• Hexagonal drive wrench length: 0.9"
• A support sleeve(side slits):
• Outer diameter: 2.8"
• Inner diameter 2.3"
• A support plate:
• Hole diameter: 0.5"
• Outer diameter 2.8"
• Trimmed with outer diameter: 2.2"
• Height 0.5"
• A pull-out pressure sleeve:
• Internal thread zies: M12 x 0.1"
• outer diameter: 2"
• Inner diameter 2"
• Height: 1.4"
• An intake pressure sleeve:
• Internal thread size: M12 x 0.1"
• Outer diameter: 2.3"
• Inner diameter: 1.9"
• Height: 1.7"
• A pull-out spacer sleeve:
• Bore diameter: 0.5"
• Outer diameter: 2.2"
• Inner diameter: 1.8"
• Height: 2.8"
• A pull sleeve:
• Hole diameter: 0.5"
• Outer diameter: 1.8"
• Inner diameter 1.4"
• Height: 1.2"
• An intake spacer sleeve:
• Internal thread size: M12 x 0.1"
• Outer diameter: 2.2"
• Inner diameter: 1.8"
• Height: 1.2"
• With lateral phase
• A spacer sleeve:
• Hole diameter: 0.5"
• Outer diameter: 2.3"
• Inner diameter 1.9"
• Height: 2.4"
• A pressure element:
• Internal thread size: M12 x 0.1"
• Outer diameter: 2"
• Iinner diameter: 1.3"
• Height: 1"
• A sleeve:
• Bore diameter: 0.5"
• Outer diameter: 2.6"
• Inner diameter 2"
• Height: 2.8"
• A pull-out pressure piece:
• Internal thread size: M12 x 0.1"
• Outer diameter: 1.9"
• Inner diameter: 1.3"
• Height: 0.8"
• An intake pressure piece:
• Internal thread size: M12 x 0.1"
• Outer diameter: 2.6"
• Inner diameter: 1.3"
• Height: 0.8"
• A draw- plate:
• Hole diameter: 0.5"
• Outer diameter: 2"
• Trimmed with outer diameter: 1.8"
• Height:0.5"
• A molded case; various print pieces; stem and pods are included
• Allows the renewing of rubber bushings the suspension
• Suitable for vehicles from BMW; 1 Series models (e.g. E81 ; E87; 3 Series E36; E46; E83; E90; E91; E92; E93; 5 Series models E60; E61; E63; 6 Series models ; E64 ; E38; 7 Series models; E65; E66; E67; 8 Series models E31; E85 Z4 models; E86; and Mini Cooper S R53 model)